oDistance from meters to yards
oSpeed from km/h to mph2
rEc – allows data recall of the last 10 measurement results:
oCLr – Clears all measurements
SEt – allows the user to select the following advanced options:
oFrSt – First Target Measurement
oLASt – Last Target Measurement o AUtO – Auto Target Measurement3
o Reticle – Change reticle from + (cross) to (rectangle)
o CAL – Calibration
CALc – Compass calibration
corr – Accuracy correction of active measurement parameters
Display Test
1 - in default, the following modes are set: distance in meters, elevation in degrees, speed is set to km/h (not measured), cross reticle, most reflective (‘auto’) target selected, no gating.
2 - this option is available only if Speed is selected from the Std menu.
3 - not shown in the menu if currently selected
Accuracy correction
If the System produces any measurement errors that lie beyond unit specification, it may be an indication that unit requires
14
