Non-CPU Lens—continued

Selecting lens number with button and dial operation

Lens number (combination of focal length and maximum aperture) set at the “Specifying lens data” can be selected using the FUNC button and Main-Command Dial (without menu operation).

1 Set “FV Lock” and “Lens data” in the “f3 FUNC. Button” (x 108).

Select “FV Lock” and “Lens data” in the “f3FUNC. Button referring to “Operation in Menu” on page 88.

“Lens data” cannot be selected alone; “FV Lock” is also selected.

2 Press the FUNC. button and rotate the Main-Command Dial to select lens number (0-9).

The lens data display appears when the FUNC. button is pressed. Check the focal length and maximum aperture and select your desired lens number.

With lens number 1, the selected lens number is displayed as “L-1” in the rear LCD panel. No number is displayed when a CPU lens is attached and when either focal length or maximum aperture is not specified with non-CPU lens.

If an SB-800 or 600 Speedlight is mounted on the camera, turn the Speedlight off before pressing the FUNC. button (since the FV Lock [x 151] has priority over the Lens data).

146

Page 146
Image 146
Nikon 1799 Selecting lens number with button and dial operation, Set FV Lock and Lens data in the f3 FUNC. Button x