Nikon 1799 instruction manual Accessories connected to 10-pin remote terminal

•Accessories connected to 10-pin remote terminal

• By attaching the following accessories to the 10-pin remote terminal of the F6, you can perform operations such as remote shooting or automatic shooting.

• When the 10-pin remote terminal is not in use, make sure to cover it with the supplied cap. Exposure to dirt or contact with foreign objects may result in a malfunction.

•To connect an accessory to the 10-pin terminal, align the indexes, insert the plug, then turn the lock screw as shown.

•The cap of the 10-pin terminal can be removed smoothly if you first remove the cap on the sync terminal.

Accessory	Usage	Length
	Enables the shutter to be released remotely reducing
Remote Cord MC-20	camera shake. Long-Time Exposure and Time mode are	Approx. 80cm
	available, and a beeping sound can be set to repeat	(2.6 ft.)
	each second for the duration of the exposure.
Extension Cord	Extension cord for MC-20, MC-22, MC-23, MC-25 or	Approx. 3m
MC-21	MC-30.	(9.8 ft.)
	Remote cord with blue, yellow and black terminals to	Approx. 1m
Remote Cord MC-22	connect to a shutter triggering device. Remote control
		(3.3 ft.)
	operation via sound or signal is available.
Connecting Cord	Connects two F6 cameras for simultaneous operation	Approx. 40cm
MC-23		(1.3 ft.)
	Adapter cord to connect a remote accessory for 2-pin
Adapter Cord	remote terminal such as Radio Control Set MW-2,	Approx. 20cm
MC-25	Intervalometer MT-2 or Modulite Remote Control Set	(0.7 ft.)
	ML-2 to F6.
	Useful for releasing shutter remotely to reduce camera	Approx. 80cm
Remote Cord MC-30	shake. Also, shutter can be locked in Long Time	(2.6 ft.)
	Exposure (Bulb).
	Enables remote control up to 100m (328 ft.) via an
Modulite Remote	infrared pulse-modulated ray. Multiple ML-2s can be	—
Control Set ML-2	used to enable more distant remote control. (Adapter
	Cord MC-25 is required.)
	Enables remote control up to 8m (26.2 ft.) via an
Modulite Remote	infrared ray. Auto triggering, where the shutter is	—
Control Set ML-3	released when the subject enters the area directly
	between the transmitter and the receiver, is available.

Miscellaneous

171