47

Rewinding film using the film rewind crank

1Turn the power switch on,open the R1

button cover and press the R1 button.

2Lift the film rewind crank and turn in the

direction of the arrow.

•Turn the film rewind crank a few times more
after the tension is gone.
•Film is completely rewound when the frame
counter shows a blinking Ein the top LCD
panel and viewfinder, and “REWIND
COMPLETED” is displayed in the rear LCD
panel. (Eappears without blinking in the top
LCD panel, and viewfinder indication and
“REWIND COMPLETED” display in the rear LCD
panel disappear when the exposure meter is
off.) Open the camera back and remove the
film cartridge.

Cautions on manual rewind

•Do not press the shutter release button until the film leader is rewound completely
back into the cartridge. Doing so could damage the shutter curtain.

Film rewind R1 button

•If you accidentally press the R1 button during shooting, press the shutter release
button. This returns the R1 button to its original position. (The shutter will not open
and film is advanced one frame without advancing the frame counter.)

Frame counter

•The frame counter counts backward when film is rewound manually but the display
may not indicate the correct frame number.
Detailed Operation
P930_En 04.10.19 7:18 PM Page 47