Remedy

In P mode, use ND filter.

In S mode, select a faster shutter speed.

In A mode, select a smaller aperture (larger f-number).

(If the warning indication remains after performing the above remedies in S or A mode, use an ND filter as well.)

In P mode, use flash.

In S mode, select a slower shutter speed.

In A mode, select a larger aperture (smaller f-number).

(If the warning indication remains after performing the above remedies in S or A mode, use flash as well.)

When the subject is bright, use an ND filter; when the subject is dark, use flash.

Cancel buLb by selecting a shutter speed of 30 sec. or faster, or select M mode to perform Long Time Exposure.

If non-CPU lens is attached, set the exposure mode to A or M.

Release the shutter as is to take a flash picture. (Shutter speed automatically shifts to 1/250 sec.)

With SB-800/SB-600, perform Auto FP High-Speed Sync by setting Custom Setting “e1: Flash sync speed” to “1/250 (FP auto)”.

Shoot again after confirming focus distance, aperture or flash shooting distance range.

Release shutter again. If the warning indication remains, or this warning appears frequently, contact an authorized Nikon dealer or service center.

Turn the power switch off once and on again. Warning indication disappears and additional data will not be recorded until the data in the memory is erased.

Use a Speedlight equipped with Red-Eye Reduction function.

Page

65

67

69

65

67

69

67, 69,

71

66, 70

65, 67, 68, 70

104

162

156,

163

120

159,

160

Miscellaneous

179

Page 179
Image 179
Nikon 1799 instruction manual 104 162 156 163 120 159 160