Nikon 1 V3 3 Take pictures, The Built-inFlash, 1 Raise the flash, 2 Choose a flash mode

The Built-in Flash

Use the built-in flash for additional lighting when the subject is poorly lit or to “fill-in” (illuminate) back-lit subjects. The built-in flash can be used as described below, but note that some camera settings automatically disable the built-in flash:

1 Raise the flash.

Press the flash pop-up button to raise the flash.

	Flash pop-up button
2 Choose a flash mode.
Press 3 (N) on the multi selector to	t
display a list of flash modes, then use
the multi selector to highlight the
desired mode and press Jto select.

3 Take pictures.

The flash will fire with every shot. To disable the flash, press it gently downward until it latches.

105