s

Rotate the lens as shown until it clicks into place.

If the lens supports vibration reduction (VR), vibration reduction can be controlled from the camera (0 183).

ADetaching the Lens

Be sure the lens is retracted before removal. To remove the lens, turn the camera off, then press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the camera body cap, the rear lens cap, and, if applicable, the front lens cap.

ALenses with Retractable Lens Barrel Buttons

Lenses with retractable lens barrel buttons can not be used when retracted. To unlock and extend the lens, readying the camera for use, keep the retractable lens barrel button pressed (q) while rotating the zoom ring as shown (w). The lens can be retracted and the zoom ring locked by pressing the button and rotating the ring in the opposite direction. Be careful not to press the retractable lens barrel button while attaching or removing the lens.

Zoom ring

Retractable lens barrel button

28