2 Remove the connector cap.

Remove the grip connector cap. Be sure to replace the cap when the grip is not in use.

3 Attach the grip.

s

After confirming that the camera is off, align the camera and grip as shown and tighten the knob by rotating it in the LOCK2 direction, keeping the grip held in place so that the grip signal contact slides straight into the camera grip con- nector.

ARemoving the Grip

To remove the grip, confirm that the camera is off and then loosen the mounting screw by rotating the knob in the direction opposite to that shown by the LOCK indicator.

DHandling the Grip

Do not touch the signal contacts. Failure to observe this precaution could cause product malfunction.

37