c4: Monitor off Delay

This option (available in all shooting modes) controls how long the monitor remains on when no operations are performed during playback, image review, or when menus or shooting information is displayed. Choose from 4 s (the default for image review), 10 s (the default for playback and shooting information), 20 s (the default for menus), 1 minute, 5 minutes, or 10 minutes. Choose a shorter monitor-off delay for longer battery life. Regardless of the setting chosen, the monitor remains on if no operations are performed for about ten minutes when the camera is powered by an optional EH-5a or EH-5 AC adapter.

Option

94 s e 10 s f 20 s g 1 min. h 5 min. i 10 min.

c5: Remote on Duration

Choose how long the camera will wait for a signal from the remote before cancelling delayed or quick-response remote modes (pg. 68). Choose shorter times for longer battery life. The default setting is one minute.

This option is available in all shooting modes.

Option

u1 min. (default)

v5 min.

w10 min.

x15 min.

d: Shooting/Display

d1: Beep

At the default setting of On, a beep will sound when the camera focuses in single- L servo AF (5or when shooting stationary subjects in 4autofocus mode), while

the release timer is counting down in self-timer and delayed remote modes (pg. 66, 68), or when a photograph is taken in quick-response remote mode (pg. 68). The beep will not sound when Off is selected.

This option is available in all shooting modes. The current setting is shown in the control panel: 3is displayed when the beep is on, 2when it is off.

180