4 Remove the battery when charging is complete.

Charging is complete when the CHARGE lamp stops

 

blinking. Remove the battery and unplug the charger.

X

Insert the Battery

1 Turn the camera off.

Power switch

Always turn the camera off before inserting or removing batteries.

2Open the battery-chamber cover.

Open the battery-chamber cover on the bottom of the camera.

3Insert the battery.

Insert the battery as shown at right.

4 Close the battery-chamber cover.❚❚Removing the Battery

Before removing the battery, turn the camera off. To prevent short-circuits, replace the terminal cover when the battery is not in use.

23