e3: Modeling Flash

If On is selected when the camera is being used with the built-in flash or an optional SB-900, SB-800, SB-600, or SB-R200 flash unit, a modeling flash will be emitted when the camera depth-of-field preview button is pressed (pg. 82). The default setting is Off. This option is available in P, S, A, and M modes only.

e4: Auto Bracketing Set

Choose the setting or settings bracketed when auto bracketing is in effect (P, S, A, and M modes only). Choose AE & flash (j; the default setting) to perform both exposure and flash-level bracketing (pg. 92), AE only (k) to bracket only exposure, Flash only (l) to perform only flash-level bracketing, WB bracketing (m) to perform white- balance bracketing (see below), or ADL bracketing to take one picture with Active D-Lighting on and another with Active D-Lighting off (pg. 193).

❚❚White Balance Bracketing

1 Select white balance bracketing.

Choose WB bracketing for Custom Setting e4 (Auto bracketing set). Note that white balance bracketing is not available at image quality settings of NEF (RAW) or

NEF (RAW) + JPEG.

2Choose the number of shots.

Pressing the Dbutton, rotate the main command dial to choose the number of shots in the bracketing sequence. The number of shots is shown in the control L panel.

Number of shots

Bracketing progress

indicator

Control panel

Dbutton

Main command dial

Viewfinder

At settings other than zero, a Wicon and bracketing progress indicator appear in the control panel.

191