Using the Built-in Flash

The camera supports a variety of flash modes for photographing poorly lit or backlit subjects.

❚❚Using the Built-in Flash: i, k, n, and oModes1 Choose a shooting mode.

Rotate the mode dial to select the desired mode.

h2 Choose a flash mode.

Press the M button and rotate until the desired flash mode is displayed in the control panel (pg. 71).

3Take pictures.

The flash will pop up as required when the shutter-release button is pressed halfway, and fire when a photograph is taken.

❚❚Using the Built-in Flash: P, S, A, and M Modes

1 Choose a shooting mode.

Rotate the mode dial to select the desired mode.

2 Raise the flash.

Press the M button to raise the flash.

Mbutton

3Choose a flash mode.

Press the M button and rotate until the desired flash mode is displayed in the control panel (pg. 71).

4Select a metering method and set exposure.5Take pictures.

The flash will fire whenever a picture is taken.

70