Nikon 25446 2Choose an autofocus mode, 3Check the view in the monitor

2Choose an autofocus mode.

Press the Bbutton and rotate the command

	dial until one of the following autofocus modes
	is displayed in the monitor (note that these
	autofocus modes differ from those available in
s	other shooting modes):
	Mode	Description
	Face	The camera automatically detects
		and focuses on portrait subjects
	8 priority
		facing the camera. Use for portraits.
	Wide area	Use for hand-held shots of landscapes
		and other non-portrait subjects. The
	9(default)	focus point can be selected using the
		multi selector.
	Normal	Use for pin-point focus on a selected
		spot in the frame. A tripod is
	! area
		recommended.

Bbutton Main command dial

Exit

Monitor

3Check the view in the monitor.

To magnify the view in the monitor and check focus, press the Xbutton.

X button

Exit

Press Xto zoom in up to a maximum of 6.7 ×, or press Wto zoom out. While the view through the lens is zoomed in, a navigation window will appear in a gray frame at the bottom right corner of the display. Use the multi selector to scroll to areas of the frame not visible in the monitor. Press the Jbutton to start recording (pg. 50).

AMonitor Brightness

Monitor brightness can be adjusted by pressing the Kbutton while the view through the monitor is displayed. Press 1 or 3 to adjust brightness (note that monitor brightness has no effect on pictures taken in live view mode). To return to live view, release the Kbutton.

44