Basic Setup

A language-selection dialog will be displayed the first time the camera is turned on. Choose a language and set the time and date. Note that if the time and date are not set, Bwill blink in the monitor and the time and date recorded with photographs X will be incorrect.

1 Turn the camera on.

Power switch

A language-selection dialog will be displayed.

2Select a language.

Press 1 or 3 to highlight the desired language and press

J.

3Choose a time zone.

A time-zone selection dialog will be displayed. Press 4or 2 to highlight the local time zone (the UTC field shows the difference between the selected time zone and Coordinated Universal Time, or UTC, in hours) and press

J.

4Turn daylight saving time on or off.

Daylight saving time options will be displayed. Daylight saving time is off by default; if daylight saving time is in effect in the local time zone, press 1 to highlight On and press J.

5Set the date and time.

The dialog shown at right will be displayed. Press 4 or 2 to select an item, 1 or 3 to change. Press Jwhen the clock is set to the current date and time.

27