4 Cover the viewfinder

DK-5 eyepiece cap

After framing the photograph, remove the viewfinder eyepiece cup and insert the supplied DK-5 eyepiece cap as shown. This prevents light entering via the viewfinder interfering with exposure.

5 Take the photograph.

h

Aim the transmitter on the ML-L3 at the infrared

 

receiver on the camera and press the shutter-release

 

button on the ML-L3. In delayed remote mode, the self-

 

timer lamp will light for about two seconds before the

 

shutter is released. In quick-response remote mode, the self-timer lamp will

 

flash after the shutter has been released. In AF-Aor AF-Sis selected in autofocus

 

modes (pg. 54), the camera will return to stand-by mode without releasing the

 

shutter if unable to focus. The camera will release the shutter without focusing

 

in manual focus mode, if AF-Cis selected in autofocus mode, or if the camera has

 

already been focused using the camera shutter-release button (see step 3).

 

Remote control mode can be cancelled by selecting another release mode. Single- frame or continuous mode will be restored if the camera is turned off or no operations are about one minute.

DUsing the Built-in Flash

If the flash is required, the camera will only respond to the shutter-release button on the ML-L3 once the flash has charged. In i, k, n, and omodes, the flash will begin charging when delayed remote or quick-response remote mode is selected; once the flash is charged, it will automatically pop up and fire if required when the shutter-release button on the ML-L3 is pressed. In P, S, A, and M modes, raising the flash during the two-second count-down in delayed remote mode will cancel the two-second timer. Wait for the flash to charge and then press the shutter-release button on the ML-L3 to restart the timer.

In flash-sync modes that support red-eye reduction, the red-eye reduction lamp will light for about one second before the shutter is released. In delayed remote mode, the self-timer lamp will light for two seconds, followed by the red-eye reduction lamp, which lights for one second before the shutter is released to reduce red-eye.

ASee Also

For information on choosing the length of time the camera will remain in stand-by mode before remote control mode is cancelled, see Custom Setting c5 (Remote on duration, pg. 180). For information on controlling the beeps that sound when the remote control is used, see Custom Setting d1 (Beep, pg. 180).

69