Caring for the Camera and Battery
To ensure continued enjoyment of your Nikon Product, observe the following precautions when using or storing the device:
Keep dry
This product is not waterproof, and may malfunction if immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage.
Do not drop
The product may malfunction if subjected to strong shocks or vibration.
Handle all moving parts with care
Do not apply force to the lens or to the battery, card, or connector. These parts are especially susceptible to damage.
Avoid sudden changes in temperature
Sudden changes in temperature, such as occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature.
Turn the product off before removing or disconnecting the power source
Do not unplug the product or remove the battery while the product is on, or while images are being recorded or deleted from memory. Forcibly cutting power to the product in these circumstances could result in loss of data or in damage to the internal circuitry or memory. To prevent an accidental interruption of power, avoid carrying the product from one location to another while the AC adapter is connected.
Keep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data stored on the memory card, or affect the product’s internal circuitry.
134
Storage
When the camera will not be used for an extended period, return the lens section to its original position and remove the battery and store it in a cool, dry place. To prevent mold or mildew, store the camera in a dry,
•are poorly ventilated or damp
•are next to equipment that produces strong electromagnetic fields, such as televisions or radios
•are exposed to temperatures above 50°C/122°F (for example, near a space heater or in a closed vehicle on a hot day) or below
•are subject to humidities of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again.
Hints and Tips for Handling Batteries
Some tips to ensure that your camera is always ready to shoot:
•When you turn the camera on, check the
•Ready a spare battery and keep it fully charged when taking photographs on important occasions. Depending on your location, you may find it difficult to purchase replacement batteries on short notice.
•On cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge.
•Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use.
135
Technical
