Nikon 4300 manual Transfer button, Completed will be displayed in the camera monitor, Mac OS

Connecting to a Computer

Before copying pictures to your computer, you will need to install Nikon View, an application that allows you to transfer pictures from the camera memory card to a computer hard disk and view them on the computer monitor. Once you have installed Nikon View, you are ready to transfer photographs and movies to your computer. Pictures can be transferred via a direct USB connection between the camera and computer. If your computer has built-in USB interface, you can connect it to your camera using the UC-E1 cable provided.

Connect the UC-E1 USB cable as shown below.

•Use the flat connector for connection to the computer, and connect the other end of the cable to the camera’s USB connector. See the Quick Start Guide for details on connecting camera to a computer or transferring pictures to a computer.

The TRANSFER button

Pictures can also be transferred using the TRANSFER button on the camera.

				Connections—Connecting
• When the TRANSFER button on the camera is pressed, pictures with D
markings are transferred to computer.
• The display in the camera monitor changes as follows:
	PREPARING	TRANSFERRING		to
		IMAGE TO	TRANSFER COMPLETED
	TO TRANSFER			a
		COMPUTER
				Computer
• When all marked pictures have been transferred, the message “TRANSFER
COMPLETED” will be displayed in the camera monitor.

Mac OS X

Pictures can not be transferred using the camera TRANSFER button in Mac OS

X 10.1.2. Use the button in Nikon View to transfer pictures. Before using the camera TRANSFER button to transfer pictures in Mac OS X version 10.1.3 or later, set the USB option in the camera SET-UP menu to PTP (p. 93)

66 67