Nikon 4300 manual First Steps, Attach the Camera Strap and Lens Cap, Insert the Battery

First Steps

Step 1—Attach the Camera Strap and Lens Cap

2 Turn the camera off

Camera Strap

Lens cap

• Attach the strap as shown.

•Press the tabs on the lens cap to attach/detach it.

•We recommend attaching the lens cap to the strap loop with the supplied cord to prevent it from being misplaced.

3 Open the battery-chamber cover

• Pressing the battery-chamber cover latch ⁄, slide the battery-chamber cover out ¤ and flip it open ‹.

4 Insert the battery
EN-EL1	2CR5 (DL245)

Introduction—First Steps

Step 2—Insert the Battery

Your camera is powered by a single rechargeable Nikon EN-EL1 lithium-ion battery or a non-rechargeable 2CR5 (DL245) lithium battery (available separately).

1 Charge the battery

•The EN-EL1 is not fully charged at shipment. A battery charger is provided with the camera; we recommend that you charge the battery before use. Instructions for charging the battery may be found in the instruction manual included with the charger.

Read Battery Warnings

Read and follow all warnings and instructions supplied by the battery manufacturer.

16

•Insert a fully charged EN-EL1 or new 2CR5 (DL245) battery as shown in the label on the underside of the battery-chamber cover.

5 Close the battery-chamber cover

•Close the battery chamber cover ⁄ and slide it to the closed position ¤. To prevent the battery being

dislodged during operation, be sure that the battery chamber cover is properly latched.

17