Connecting to a Television or VCR

Using the video cable provided with your camera, you can connect the COOLPIX4300 to a television or VCR.

1 Connect the video cable to the camera

• Insert the black plug on the video cable into the camera’s video output connector.

2 Connect the video cable to the video device

• Connect the yellow plug to the video-in jack on the television or VCR.

3 Tune the television to the video channel

4 Turn the camera on

The television will perform the functions normally performed by the camera monitor, and the camera monitor will turn off.

Use an AC Adapter

To eliminate drain on the batteries during extended playback, connect the camera to an optional EH-21 AC adapter/battery charger or EH-53 AC adapter.

Choosing a Video Mode (p. 93)

The Video Mode item in the SETUP menu offers a choice of NTSC and PAL standards for video output. Be sure that the standard selected matches that of any video device to which you connect the camera.

68

Menu Guide

This chapter is divided into the following five sections:

Index to Menu Options

An overview of the options available in the camera menus.

Using Camera Menus

This section describes basic menu options.

The Set-Up Menu

This menu is used for basic camera setup.

The Shooting Menu

This menu contains a number of options for fine- tuning shooting settings.

The Playback Menu

The playback menu contains options for managing images stored on memory cards.

Camera Menu

Options

Index to Menu

Options

pp. 70-75

Using Camera

Menus

pp. 76-78

The Set-Up Menu

pp. 79-95

The Shooting

Menu

pp. 96-116

The Playback

Menu

pp. 117-129

69

Page 35
Image 35
Nikon 4300 manual Connect the video cable to the video device, Tune the television to the video channel Turn the camera on