Nikon D2Hs manual Custom Setting d6 LCD Illumination, 189, Exposures

Option		Description
	Controls whether rear control panel shows sen-
	sitivity (ISO equivalency) or number of exposures
Rear	remaining. Press multi selector up or down to
	highlight option, press to right to select:
control
	• ISO (default): Rear panel shows sensitivity.
panel
	• Exposures	remaining: Rear panel shows

number of exposures remaining. Sensitivity displayed only while ISO button is pressed.

Controls whether viewfinder shows frame count or number of exposures remaining (note that regardless of option selected, number of frames that can be stored in memory buffer will be

Viewfinder shown while shutter-release button is pressed).

display Press multi selector up or down to highlight op- tion, press to right to select:

•Frame count (default): Viewfinder shows frame count.

•Exposures remaining: Viewfinder shows number of exposures re- maining.

Custom Setting d6: LCD Illumination

This option controls the control panel backlights (LCD illuminators). Highlight d6 Illumination in the second level of the CSM menu ( 170) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.

OptionDescription

Lamp on switch Control panels illuminate only while power switch is rotated to

(default)	position.
Any button	Control panels illuminate whenever exposure meters are active
	(note that this increases drain on battery).

Menu Guide—Custom Settings

189