Nikon D2Hs manual 247, Problem Solution, Monitor panel

Indicator
Control	View-
panel	finder	Problem				Solution
(blinks)		selected in shutter-pri-				Change shutter speed or se-	86,
		ority auto.				lect manual exposure mode.	90
		Speedlight	that	does	not	Change flash mode setting on
		support D-TTL flash control					108
(blinks)		attached and set to TTL.				optional Speedlight.
		Speedlight	that	does	not	Change flash sync mode or
		support red-eye reduction at-					108–
(blinks)		tached and	flash	sync	mode	use Speedlight that supports	110
		set to red-eye reduction.				red-eye reduction.
		If indicator blinks for 3 s after				Check photo in monitor; if
	(blinks)	flash fires, photo may be un-				underexposed, adjust settings	114
		derexposed.				and try again.
						Release shutter. If error per-
		Camera malfunction.				sists or appears frequently,	2
(blinks)						consult with Nikon-authorized
						service representative.
		Memory insufficient to record				• Reduce quality or size.	43
		further photos at current set-
(blinks)	(blinks)	tings, or camera has run out of				• Delete photographs.	146
		file or folder numbers.				• Insert new memory card.	22

Technical Notes—Troubleshooting

Indicator
Control
Monitor panel	Problem
NO CARD	Camera cannot
PRESENT	memory card.

Solution

Turn camera off and con- detect firm that card is correctly 22

inserted.

CARD IS NOT	Memory card has not been	23,
FORMATTED	formatted for use in D2Hs. Format memory card.	202

247