Nikon Image Converter user manual Mount the relay lens now attached to

5	Mount the relay lens (now attached to the	a. Open the lock ring (b)
	camera) onto the Mini35Digital image	b. Slightly release the 4 screws (s) in front of
	converter:	the relay lens. The bayonet ring (r) must be
		moveable.
	Before the 1st attachment, the bayonet mount	c. Line up the relay lens into the port holding
	of the relay lens has to be adjusted:	the camera by its top handle. Make sure
		the locating pin is fully engaged. Close lock
		ring.
		d. Bring the camera carefully into a standard
		vertical position. Then remove camera
		without losing this position.
		e. Lock the 4 screws in the relay front and re-
		connect relay lens to the adapter port
P		f. Close the lock ring (b) clockwise to secure
		the relay lens.
A
N	Engage the relay into the back port of the	Note: Be sure the camera cannot disengage
A
	Mini35 and secure it in place with the lock ring	accidentally.
S
	(b).
O

N

I

C 32