Nikon Image Converter user manual Attach the camera support

6Attach the camera support:

Slide the camera support bracket under the camera and attach the knob (f) to the bottom of the camera:

Lock the lever-knob (e) at the back of the camera support and lock the screws at the bottom of the camera support

a.The big knurled knob (f) through the camera platform has to line up with the ¼” threaded hole on the camera bottom.

b.Start engaging the thread of the knob in the thread of the camera but do not tighten it yet.

c.Release the lever-knob (e) at the back of the platform to allow the spring-loaded pad

(d) to come in contact with the base of the camera.

d.Finish tightening the knob (f) at the bottom of the platform.

P A N A S O N I

33

C