
Connecting to a Printer
1 Turn off the camera.
2 Turn on the printer.
•Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
Printers and Computers Televisions, to Connecting
4 The camera turns on automatically.
• When connected correctly, the PictBridge startup screen (1) will be displayed in the camera monitor. Then the Print selection screen (2) will be displayed.
1 | 2 Print selection |
15/05
2010
NO. 32
32
BConnecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.
BIf the PictBridge Screen is not DisplayedTurn off the camera and disconnect the USB cable. Set Charge by computer (A168) in the camera’s
setup menu to Off, then connect the camera again. | 147 |
|