Troubleshooting

Problem

Cause/Solution

A

 

 

• Still pictures recorded before the clock was set (when the

22, 155

 

 

“Date not set” indicator blinks during shooting) will have a

 

 

Date and time of

time stamp of “00/00/0000 00:00”; movie recordings will

 

 

recording are not

have a time stamp of “01/01/10 00:00.” Set the correct

 

 

correct.

date and time using Date in the setup menu.

 

 

 

• Check camera clock regularly against more accurate

155

 

 

timepieces and reset as required.

 

 

 

 

 

 

No information

Shooting data and photo information may be hidden. Press

 

 

displayed in

the sbutton until shooting data or photo information is

15

 

monitor.

displayed.

 

 

 

 

 

 

Date imprint not

Date has not been set.

22, 155

 

available.

 

 

 

Date not

• A shooting mode that does not support date imprint is

159

 

appearing on

 

selected.

 

 

pictures even

 

 

• Another function that is set now is restricting the date

159

 

when Date

 

imprinting.

 

 

imprint is

 

 

• The date cannot be imprinted onto a movie.

-

 

enabled.

 

 

 

 

 

 

 

 

Camera settings

Clock battery is exhausted; all settings were restored to their

156

 

reset.

default values.

 

 

 

• Reset file numbering cannot be applied when the

174, 181

 

 

folder number reaches 999 and there are images in the

 

 

cannot be done.

folder. Change the memory card, or format the internal

 

Technical

mode is set to Panorama assist, or when the shooting

 

Reset file

memory/memory card.

 

 

numbering

• Reset file numbering cannot be set when the scene

174, 181

 

 

 

 

mode is A, B, C, Dor M and Intvl timer shooting is

 

Notes

 

chosen for Continuous in the shooting menu.

 

 

 

 

 

 

 

 

 

Battery temperature is high. Turn off camera, and allow

 

and

Monitor turns off,

battery to cool down before resuming use. After the lamp

 

 

Index

and the power-on

blinks for three minutes, the camera will turn off

21

lamp blinks rapidly.

automatically, but you can also press the power switch to

 

 

turn it off manually.

 

 

Battery inserted

• The battery is not charged when the camera is turned off.

145

 

• Charging stops if the computer enters sleep mode while

-

 

into the camera is

 

the battery is charging. The camera may be turned off.

 

 

not charged when

 

 

• Depending upon computer specifications, settings, and

-

 

the camera is

power supply and allocation, it may be impossible to

 

 

connected to a

 

 

charge the battery inserted into the camera via computer

 

 

computer.

 

 

connection.

 

 

 

 

 

 

 

 

 

189