Charge the Battery

1With the battery installed, connect the camera to an electrical outlet.

Charging

AC Adapter

Electrical outlet

Power-on lamp (charge lamp)

USB cable (included)

If a plug adapter* is included with your camera, securely connect it to the Charging AC Adapter. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.

*The shape of the plug adapter varies according to the country or region in which the camera was purchased.

This step can be omitted if the plug adapter comes permanently bonded to the charging AC adapter.

•The power-on lamp (charge lamp) slowly flashes green to indicate that the battery is charging.

•When charging is complete, the power-on lamp turns off. It takes about 3 hours and 40 minutes to charge a fully exhausted battery.

•The battery cannot be charged when the power-on lamp quickly flashes green, possibly due to one of the reasons described below.

-The ambient temperature is not suited to charging.

-The USB cable or Charging AC Adapter is not properly connected.

-The battery is damaged.

2Disconnect the charging AC adapter from the electrical outlet and then disconnect the USB cable.

Shooting for Preparing

11