
Basic Camera Setup: The Setup Menu
wElectronic VR
Press the dbutton Mz(Setup menu) (A112) MwElectronic VR
Choose whether to use electronic VR (vibration reduction) when taking still pictures.
Auto
When all of the following conditions are met while taking still pictures, electronic VR is applied and the effects of camera shake are reduced.
•The flash is turned off or set to slow sync mode.
•The shutter speed is slow.
•The Continuous setting is set to Single.
Off (default setting)
Electronic VR is disabled.
When Auto is selected, Rappears on the monitor (A6), and electronic VR is applied depending on shooting conditions.
BNotes on Electronic Vibration Reduction
•Except during slow sync mode, Electronic VR will not activate when flash is used.
•If the exposure period exceeds a certain period of time, Electronic VR will not function.
•The effectiveness of Electronic VR decreases as camera shake increases.
•Electronic VR does not reduce the effects of subject movement.
•Saving a picture on which Electronic VR is applied may take some time.
•Electronic VR will not activate when sensitivity is ISO 800 or above.
•Electronic VR cannot be used together with date imprint (A119). When using date imprint, setting Electronic VR to Auto automatically changes the date imprint setting to Off.
•Electronic VR and auto flash with
DElectronic VR for Movies
Menus Setup and Playback Shooting,