Inserting Memory Cards

B Formatting Memory Cards

 

 

 

 

 

 

 

 

If the message at right is displayed, the memory card must be

 

 

Card is not formatted.

formatted before use (A123). Note that formatting permanently

 

 

Format card?

deletes all pictures and other data on the memory card. Be sure

 

 

 

 

to make copies of any pictures you wish to keep before formatting

 

 

No

 

the memory card.

 

 

Yes

 

Use the multi selector to choose Yes and press the kbutton. The

 

 

 

 

 

 

 

 

confirmation dialog will be displayed. To start formatting, choose

 

 

 

 

Format and press the kbutton.

 

 

 

 

Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting is complete.

The first time you insert the memory cards used in other devices into the COOLPIX S220/S225, be sure to format them using this camera (A123).

BThe Write Protect Switch

Memory cards are equipped with a write protect switch. When Write protect switch this switch is in the “lock” position, data cannot be written to,

or deleted from, the memory card. If the switch is in the “lock” position, unlock it by sliding the switch to the “write” position to record or delete pictures, or to format the memory card.

Steps First

BMemory Cards

Use only Secure Digital memory cards.

Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card:

-Take out the battery or memory card

-Turn off the camera

-Disconnect the AC adapter

Do not format the memory card using a computer.

Do not disassemble or modify.

Do not drop, bend, or expose to water or strong physical shocks.

Do not touch the metal terminals with your fingers or metal objects.

Do not affix labels or stickers to the memory card.

Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.

Do not expose to humidity, dust, or to corrosive gases.

19