Error Messages
The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.
| Display | Problem |
| Solution | A |
| O(blinks) | Clock not set. | Set clock. | ||
|
|
|
|
| |
| B | Battery running low. | Prepare to charge or | ||
|
|
| change battery. |
| |
|
|
|
|
| |
| N | Battery exhausted. | Charge or change battery. | ||
| Battery exhausted. |
|
|
|
|
|
|
|
|
| |
| P | Battery temperature is | Turn off camera, and allow | ||
| Battery temperature | high. | battery to cool down |
| |
| high |
| before resuming use. After |
| |
|
|
| 5 seconds, this message |
| |
|
|
| will disappear, the monitor |
| |
|
|
| will turn off, and the |
| |
|
|
|
| ||
|
|
| lamp will blink rapidly. |
| |
|
|
| After the lamps blink for |
| |
|
|
| three minutes, the camera |
| |
|
|
| will turn off automatically. |
| |
|
|
| Pressing the power switch |
| |
|
|
| also turns off the camera. |
| |
|
|
|
|
|
|
| Q(● blinks red) | Camera cannot focus. | • | Refocus. | |
|
|
| • | Use focus lock. | |
|
|
|
|
| |
| P | Camera cannot perform | Wait until message clears | ||
| Please wait for the | other operations until | from display automatically |
| |
Technical | camera to finish | recording is complete. | when recording is |
| |
recording. |
| complete. |
| ||
|
|
| |||
|
|
|
|
| |
| N | Slide | |||
Notes | Memory card is write | “lock” position. | to “write” position. |
| |
protected. |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
| P | Error accessing memory | • | Use approved card. | |
| This card cannot be | card. | • | Check that connectors | |
| used. |
| • | are clean. |
|
| P |
| Confirm that memory | ||
|
|
| card is correctly inserted. |
| |
| This card cannot be |
|
|
| |
| read. |
|
|
|
|
|
|
|
|
| |
| P | Memory card has not been | Choose Yes and press the | ||
| Card is not formatted. | formatted for use in | kbutton to format card, |
| |
| Format card? | COOLPIX S220/S225. | or turn camera off and |
| |
| No |
| replace card. |
| |
| Yes |
|
|
|
|
134