
Using the Flash
BShooting When Lighting is Poor and the Flash is Disabled (W)
•Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of camera shake.
•The Eindicator is displayed when the camera automatically increases sensitivity. Pictures taken when Eis displayed may be slightly mottled.
BNote on Using the Flash
When using the flash, reflections from dust particles in the air may appear as bright spots in pictures. To reduce these reflections, set the flash to W(Off).
CThe Flash Lamp
The flash lamp indicates flash status when the shutter- release button is pressed halfway.
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try again.
• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off, and remain off, until the flash is fully charged.
CThe Flash Mode Setting
The default flash mode setting varies with shooting mode.
•A(auto): U(auto)
•C(scene): varies with the selected scene mode (A 34)
•a(smile): fixed at W(off) when On is selected for Blink proof, U(auto) when Off is selected for Blink proof (A 46)
The flash mode setting applied in A(auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A(auto) mode is selected.
C
This camera uses advanced
Mode Auto Playback: and Photography Basic
29