The Setup Menu

Sound Settings

Press the dbutton Mztab MSound settings

Adjust the following sound settings.

Option

Description

 

 

Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully,

Button soundtwice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Select On (default setting) or Off. No sound is played with

Shutter soundshutter release when some features such as continuous shooting or BSS (Best Shot Selector) are enabled or recording

movies, even if On is selected.

BNote About Sound Settings

In Pet portrait scene mode, button and shutter sounds are disabled.

Auto Off

Press the dbutton Mztab MAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A21) to save power. In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.

CWhen the Monitor Turns off for the Power Saving Function

•Power-on lamp flashes in standby mode.

•Camera turns off after approximately three minutes passes in standby mode.

•To reactivate the monitor while the power on lamp is flashing, press any of the following buttons: - Power switch, shutter-release button, Abutton, cbutton or b(emovie-record) button

CAuto Off Settings

•The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

-When a menu is displayed: three minutes

-During slide show playback: up to 30 minutes

-When the AC adapter EH-62G is connected: 30 minutes

•The camera does not enter standby mode when transferring images using an Eye-Fi card.

Section Reference

E59