Nikon S2700 188

Troubleshooting

	Problem		Cause/Solution	A
		•	The camera is off.	21
		•	Battery is exhausted.	20
		•	Standby mode for saving power. Press the	21
			power switch, shutter-release button, A
			button, cbutton, or b (emovie-record)
	Monitor is blank.	•	button.
	Monitor is blank.		When flash lamp flashes, wait until flash has	53
			When flash lamp flashes, wait until flash has	53
		•	charged.
		•	The camera and computer are connected via	72, 75
		•	USB cable.	72, E 17
		•	The camera and TV are connected via audio/	72, E 17
			video cable.

	Monitor is hard to read.	•	Adjust monitor brightness.	86, E 53
	Monitor is hard to read.	•	Monitor is dirty. Clean monitor.	F 6
		•	Monitor is dirty. Clean monitor.	F 6
		•	If the camera clock has not been set, “Date	22, E 50
			not set” indicator flashes with shooting and
			movie recording. Images and movies
			recorded before clock is set are dated “00/
			00/0000 00:00” or “01/01/2013 00:00”
	Date and time of recording		respectively. Set the correct time and date
	Date and time of recording		from the Time zone and date option in the
	are not correct.		from the Time zone and date option in the
	are not correct.		setup menu.
		•	setup menu.	23, E 50
		•	The camera clock is not as accurate as	23, E 50
Technical			ordinary watches or clocks. Periodically
Technical			compare the time of the camera clock with
			compare the time of the camera clock with
			that of a more accurate timepieces and reset
			as required.
Notes	No indicators displayed in	Hide info is selected for Photo info in		86, E 53
Notes	monitor.	Monitor settings in the setup menu.


and	Print date not available.	The camera clock has not been set.		22, 86,
and	Print date not available.	The camera clock has not been set.		E 50
Index				E 50
Index	Date not appearing on	•	The current shooting mode is one that does	86, E 55
	images even when Print	•	not support Print date.	86, E 55
	date is enabled.	•	The date cannot be imprinted on movies.
	Screen for setting time
	zone and date is displayed	Clock battery is exhausted; all settings were
	when the camera is turned	Clock battery is exhausted; all settings were		22, 23
	when the camera is turned	restored to their default values.		22, 23
	on.	restored to their default values.
	on.
	The camera settings reset.

		Battery temperature is high. Turn off the
	Monitor turns off, and the	camera and allow battery to cool down before
	Monitor turns off, and the	resuming use. After the lamp flashes for three		21
	power-on lamp flashes	resuming use. After the lamp flashes for three
	power-on lamp flashes	minutes, the camera will turn off automatically.
	rapidly.	minutes, the camera will turn off automatically.
	rapidly.	Pressing the power switch also turns off the
		Pressing the power switch also turns off the
		camera.