
Features That Can Be Set Using the Multi Selector
Using the Flash (Flash Modes)The flash mode can be set to match the shooting conditions.
1 Press the multi selector H(mflash mode).
2 Press the multi selector Hor Ito choose the desired flash mode and press the kbutton.
• | See “Available Flash Modes” (A54) for more |
|
| information. |
|
• | If a setting is not applied by pressing the kbutton |
|
| within a few seconds, the selection will be canceled. |
|
| Auto |
•When U(Auto) is applied, Dis only displayed for
a few seconds, regardless of Photo info settings (E53).
3Frame the subject and take an image.
• The flash lamp indicates flash status when the shutter- release button is pressed halfway.
- On: The flash will fire when you press the shutter- release button all the way down.
-Flashes: The flash is charging. Wait a few seconds and try again.
-Off: The flash will not fire when an image is taken.
•If the battery is low, the monitor will be turned off while the flash is charging.
CEffective Range of the FlashFeatures Shooting
When ISO sensitivity is set to Auto, the flash has a range of |
|
maximum |
|
telephoto zoom position. | 53 |
|