Nikon S2700 Error Messages

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display		Cause/Solution	A
	O(flashes)	Clock not set.		E50
		Set date and time.
	Battery exhausted.	Charge or replace the battery.		14, 16
		Battery temperature is high.
		Turn off camera, and allow battery to cool down before
	Battery temperature	resuming use. After five seconds, the monitor will turn off
		and the power-on lamp will flash rapidly. After the lamps		21
	high
		flash for three minutes, the camera will turn off
		automatically. Pressing the power switch also turns off
		the camera.
	The camera will turn	The camera has become hot.
	off to prevent	The camera turns off automatically. Leave the camera off		80
	overheating.	until it has cooled and then turn it on again.
		Camera cannot focus.
	Q(● flashes red)	•	Refocus.	26, 29
		•	Use focus lock.	67
Reference	Please wait for the	Camera cannot perform other operations until recording
		is complete.
	camera to finish			–
		Wait until message clears from display automatically
	recording.
		when recording is complete.
Section	Memory card is	Write-protect switch is in “lock” position.		–
	write protected.	Slide write-protect switch to “write” position.
		Write-protect switch of Eye-Fi card is in “lock” position.		–
		Slide the write-protect switch to “write” position.
	Not available if Eye-
		Error accessing Eye-Fi card.
	Fi card is locked.			18
		• Check that terminals are clean.
		• Confirm that Eye-Fi card is correctly inserted.		18
	This card cannot be	Error accessing memory card.
	used.	•	Use approved card.	19
	This card cannot be	• Check that connectors are clean.		18
	read.	• Confirm that memory card is correctly inserted.		18

E72