57
Shooting Features

Using the Flash (Flash Modes)

You can set the flash mode to match the shooting conditions.
1Press the multi selector H (m flash mode).
2Press H or I to select the desired mode and
press the k button.
See “Available Flash Modes” (A58) for more information.
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
When U (auto) is applied, D is only displayed for a
few seconds, regardless of the setting in Monitor settings
(A104).
BThe Flash Lamp
The flash lamp indicates the status of the flash when you press
the shutter-release button halfway.
- On: The flas h will fire when you press the shutter-release button
all the way down.
- Flashing: The flash is charging. The camera cannot take images.
- Off: The flash will not fire when an image is taken.
If the battery is low, the monitor will turn off in order to save
power while the flash is charging.
CEffective Range of the Flash
When ISO sensitivity is set to Auto, the flash has a range of 1.0 to 4.0 m (3 ft 4 in. to 13 ft) at the
maximum wide-angle zoom position and a range of 1.5 to 2.0 m (5 ft to 6 ft 6 in.) at the ma ximum
telephoto zoom position.
Auto