Nikon SB-102 instruction manual Non-TTL. Automatic Operation

BASIC OPERATIONS-confinued____

A·3. Set the f/stop on the lens.

When you have determined which flstop to use, set this flstop on the lens. In the photograph , f/8 is set.

B·2. Remove the sensor socket cover@ .

Turn the sensor socket cover counterclockwise, then pull it up.

288. Non-TTL. Automatic

Operation.

B·1. Attach the Sensor Unit SU·101 to the camera's acces· sory shoe.

Turn the sensor unit'slocking wheel counterclockwise as far as it will go, slip the unit's mounting foot into the camera 'saccessory shoe, and turn the locking wheel clockwise to tighten it.

B·3. Connect the sensor cord to theSB·102.

Remove the dust-proof plastic cap from the sensor cord 's speedlight plug (black). Insert the speedlight plug into the sensor socket after aligning the sensor socket index ® with the red index on the speedlight plug . When the speedlight plug is inserted, turn its locking ring clock- wise as far as it will go to secure the plug.

Check the O·ring: Before con - necting the speedlight plug to the speedlight, examine the plug 's O-ring for dust and scratches and be sure it is properly seated and lubricated.

•When a plastic frame finder or optical view- finder is mounted on the camera 's accessory shoe, use the optional sensor holder to attach the SU-101 to the speedlight bracket.

B·4. Set the shooting mode selector switch to "AUTO."

14