Niles Audio VCS-2D-HP manual The speaker wires are easier to attach-no heavy control to hold onto

H I G H P O W E R S T E R E O V O L U M E C O N T R O L

of attenuation instead of 8. Steps 11-6 attenuate -3 dB per step; steps 5-2 are -6 dB per step. Step 12 is “full-on” and step 1 is “full-off”. The VCS-2D-HP delivers “POP-FREE” switching between all steps.

●Silent When Off – Niles controls completely silence your speakers when they are at the full-off position

●Removable Connnectors – The connectors on the VCS- 2D-HP are removable and accommodate up to 14 gauge speaker wire. The connectors simplify your installation:

•The speaker wires are easier to attach—no heavy control to hold onto.

•The control may be removed without disconnecting any wiring.

•”Wire-Guard” barriers between each connector terminal reduce the chance of a short-circuit.

●Mounting depth of only 2 9/16”. Fits into standard 18 cu. in. 1-gang electrical boxes.

●Printed circuit board construction uses no hand wiring, assuring high reliability.

●Tested Performance – 100% tested, electronically and acoustically, for frequency response, distortion and power handling.

2