Nilfisk-Advance America BRX 700 Series manual English

A-2 / ENGLISH

TABLE OF CONTENTS

	page
Introduction	A-2
Cautions and Warnings	A-3
Know Your Machine	A-4
Control Panel	A-5
Prepare the Machine for Use
Description of the Battery Condition Indicators	A-6
Install the Batteries	A-6
Filling the Solution Tank	A-7
Pre-Spraying the Carpet	A-7
Plan for Cleaning	A-7
Detergent (AXP™/EDS™) System Preparation & Use	A-8-9
Operating the Machine	A-10
Using Attachments	A-10
After Use	A-11
Maintenance Schedule	A-11
Vacuum Shoe Maintenance	A-11
Spray Nozzle Maintenance	A-11
Lubricating the Machine	A-11
Cleaning the Vacuum Motor Filters	A-11
Power Brush Maintenance	A-11
Removing the Brushes	A-12
Removing the Vacuum Shoes	A-12
Charging the Batteries	A-12
Check the Battery Electrolyte Level	A-12
Troubleshooting	A-13
Technical Specifications	A-14

INTRODUCTION

This manual will help you get the most from your Nilfisk-Advance Rider Extractor. Read it thoroughly before operating the machine.

Note: Bold numbers in parentheses indicate an item illustrated on pages A-4 – A-5.

This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Nilfisk-Advance Service Center, who employs factory trained service personnel, and maintains an inventory of Nilfisk-Advance original replacement parts and accessories.

Call the NILFISK-ADVANCE DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.

(Dealer, affix service sticker here.)

NAME PLATE

The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.

MODEL NUMBER ______________________________________________

SERIAL NUMBER ______________________________________________

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping carton (if applicable) so that it can be inspected. Contact the Nilfisk-Advance Customer Service Department immediately to file a freight damage claim. Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.

A-2- FORM NO. 56041541 - AquaRide™ SE, AquaRide™ SE AXP / BRX 700 series revised 3/06