PLEASE READ THESE ESSENTIAL INSTRUCTIONS
(Only applicable to UK)
THIS VACUUM CLEANER is designed, developed and rigorously tested to function efficiently and safely when properly maintained and used in accordance with the following instructions. These instructions have been prepared with safety and efficiency paramount.
THE MACHINE OPERATOR must understand these instruct- ions for use, and be made aware of any relevant regulations and legislation in force at the time of use.
CAUTION - This machine is not suitable for use in explosive or inflammable atmospheres or where such atmospheres are likely to be produced by the presence of volatile liquid or inflammable gas or vapour.
CAUTION - In no circumstances should the power supply cord be wrapped around fingers or any part of the operators person.
CAUTION - The electrical supply plug must not be subjected to undue stress by pulling on the power supply cord.
Your MACHINE must only be connected to an electrical supply of the same voltage and frequency as indicated on the rating plate. Ensure that the plug fitted to the end of the power supply cord is suitable for your supply socket, if not refer to the information contained in 'Electrical Connections', or consult a qualified electrician. The electrical installation from which the supply is drawn must be maintained to current Institute of Electrical Engineers wiring regulations.
REGULAR SERVICING and INSPECTION of your machine must be carried out by suitably qualified personnel in accordance with relevant legislation and regulations. In particular, electrical tests for earth con- tinuity, insulation resistance, and condition of the flex- ible cord should be checked frequently.
In the event of any defect, the machine MUST be withdrawn from service, completely checked and re- paired.
Trained Service Engineers will be pleased to carry out on site servicing on a regular or as requested basis, to ensure the continuing safety and efficiency of your machine.
8
