SERVICE INSTRUCTIONS

 

2

 

4

 

1

 

3

C0477a

FIGURE 11

MAIN BROOM SERVICE INSTRUCTIONS

TO CHECK THE MAIN BROOM SWEEP PATTERN

Check the main broom sweep pattern after changing the broom or when poor sweeping performance is encountered while sweeping.

1.While the machine is not moving, lower the main broom to the SWEEP position and let machine sweep in one spot for a short period.

2.Before moving machine, move main broom lever to the OFF position and move the sweeper forward until you can see the pattern left by the main broom bristles on the floor.

3.Check the width of the pattern on the floor to determine if the main broom requires adjustment.

-A normal sweep pattern left on the floor will be between one and two inches wide.

-A pattern that is more than two inches wide indicates the broom linkage needs to be adjusted “UP.”

-A pattern that is less than one inch wide indicates the broom linkage needs to be adjusted “DOWN.”

WARNING

Always engage the safety latch before working under the Battery cover.

TO ADJUST THE MAIN BROOM SWEEP HEIGHT

When changing the sweep height adjustment it is recommended that the bolt be adjusted one turn at a time, After adjustment, recheck the sweep pattern to determine if further adjustment is necessary.

1.Gain access to the main broom height adjustment bolt by lifting the battery compartment cover, locking it in the up position and removing the right side panel cover.

2.Locate the Main Broom Height Adjustment bolt, which is located at the bottom of the Main Broom Lift linkage.(It will have a spring around it)

3.Turn the adjustment screw as described below.

-Turn the adjustment bolt counterclockwise to INCREASE the sweep pattern width. -Turn the adjustment screw clockwise to DECREASE the sweep pattern width.

WARNING

Always park on a level surface, turn key off, and engage wheel lock before working on the machine to keep it

from creeping or rolling.

TO CHANGE THE MAIN BROOM [See Figure 11]

Replace the main broom when the bristles become worn to 1-inch length.

1.Park the sweeper on a smooth level surface and engage the wheel lock.

2.Gain access to the main broom by opening the left-hand side broom compartment door.

3.Remove the Main broom Idler hub [Item 2] by loosening the threaded knob [Item 1].

4.Grasp the Main Broom [Item 3] and remove it from the drive hub. [Item 2].

5.Insert Replacement Broom [Item 3] Into the broom compartment. Pay special attention to the slots on the broom, it may be necessary to rotate the broom so the tabs on the drive hub align with the slots on the broom.

6.Reinstall the idler hub [Item 2] to the broom and over the locator stud [Item 4] and screw provided for the threaded knob [Item 1].

7.Install the threaded knob and close the Broom Door.

8.Recheck Main Broom Sweep Pattern.

1-18

American-Lincoln Technology

 

114 RS Operator’s Manual

Page 18 Page 20
Page 19
Image 19
Nilfisk-ALTO 114RS SWEEPER manual Service Instructions, To Adjust the Main Broom Sweep Height
Page 18 Page 20

114RS SWEEPER specifications

The Nilfisk-ALTO 114RS Sweeper is a powerful and efficient machine designed to meet the demanding needs of commercial and industrial cleaning applications. This versatile equipment is widely recognized for its durability, ease of use, and advanced features, making it an essential tool for maintaining cleanliness in various environments such as warehouses, shopping centers, and outdoor spaces.

One of the standout features of the Nilfisk-ALTO 114RS is its robust design. Constructed with high-quality materials, this sweeper is built to withstand tough working conditions while ensuring long-lasting performance. The ergonomic design makes it easy to maneuver, even in tight spaces, allowing operators to clean large areas quickly and effectively.

The Nilfisk-ALTO 114RS is equipped with a powerful suction system that delivers excellent dust control. This technology minimizes airborne particles, providing a cleaner and healthier environment for both workers and customers. The dual filter system enhances dust collection efficiency, extending the lifespan of the filters and reducing maintenance needs.

Another notable characteristic of the 114RS is its advanced intuitive controls. The user-friendly interface simplifies operation, enabling operators to focus on cleaning rather than navigating complex settings. The adjustable sweeping speed allows for optimized performance based on the nature of the task, ensuring thorough cleaning without compromising efficiency.

In addition, the Nilfisk-ALTO 114RS features a large debris hopper that can hold a significant amount of waste, reducing the frequency of emptying and allowing for continuous operation over extended periods. The easy-to-empty hopper further enhances productivity, making it convenient for workers to dispose of collected debris quickly.

The battery-powered version of the 114RS provides the added benefit of being environmentally friendly and quieter compared to gas-powered alternatives. This makes it suitable for use in noise-sensitive areas, such as hospitals or schools, without disrupting daily activities.

Overall, the Nilfisk-ALTO 114RS Sweeper combines powerful cleaning performance, advanced technology, and user-friendly design. Its robust construction, dust control capabilities, efficient operation, and environmental considerations make it an ideal choice for businesses seeking to maintain high cleanliness standards while maximizing operational efficiency. The 114RS is not just a sweeper; it is a reliable partner in achieving a cleaner and more productive workspace.
Top Page Image Contents