Nintendo DSi XL, UTLSBKA Access point steps, Tap Advanced Setup, Search for an Access Point see

83

Internet Setup (cont.)

Advanced Setup (See glossary, page 109, for definition of terms)

84

Advanced Setup allows settings for connecting to the Internet using WPA security, proxy settings and settings for connecting with WPS.

Advanced Setup (connections 4 – 6) cannot be used with DS-exclusive software. When connecting to the Internet with DS-exclusive software, configure normal Internet settings (connections 1 – 3).

Applications &Settings	Tap Connection Settings
	How to Connect

Tap Advanced Setup

Tap the connection type best suited for your access point

Access point steps

Push-Button Connection

Continue to push the WPS Button until the lamp blinks

Applications & Settings

PIN connection

Set the PIN number displayed on the

Nintendo DSi XL screen in your access point

Tap a connection labeled None

Tap the connection method best-suited for your connection environment

• To set up using WPS:

Tap the WPS icon and proceed to step .

•Search for an Access Point (see page 79).

•Manual Setup *The following instructions are the same as for configuring normal settings (see page 81).

It may take as long as 2 minutes until setup completes.

Tap Next

Tap OK to perform a connection test

If the connection test is successful, settings are complete.

Immediately after completing settings using WPS, connection may fail due to the

restarting of the access point. Wait a short time, then try performing a connection test again.