Nlynx 2.1.0E 6.1 - General Tab ,

Terminal Properties

6.1 - General Tab

This General property sheet displays information that includes the name of the

product and information about the current software.

To reset the terminal properties to their factory-default settings, click the check box

and press Enter. The second time in sequence this is done, all connection settings (if

any) will be cleared and the initial Terminal Setup sequence will be invoked (see

Chapter 2).

A Serial Number may be displayed below the Bootlloader display. Serial No. is

displayed when that value was manually entered or loaded at the factory (units

shipped 3rd Quarter of 2002 or later). The serial number along with other asset

related information is displayed and stored in SNMPADM management software

V2.0B1.81 or later.

Note: The Serial Number can be manually added/edited from this screen:

- Press Alt+Ctrl+Shift(left)+Space keys.

- Dialogue Box requests entry of a Serial Number

- Serial Number will display in General Tab