Save information
1.In the standby mode, select Menu > Settings > Call settings > Calling card.
2.Enter your security code, and select OK.
3.Scroll to one of the four memory locations, and select Options > Edit > OK > Dialling sequence.
4.Select one of the following sequence types:
Access no. + phone no. + card no.
— Dial
Access no. + card no. + phone no.
—Dial
Prefix + phone no. + card no. — Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number and PIN, if required.
5.Enter the required information (access number or prefix and card number), and select OK to confirm your entries.
6.Select Card name.
7.Enter the card name, and select OK.
S e t t i n g s
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a call using your calling card.
1.In the standby mode, select Menu > Settings > Call settings > Calling card.
2.Enter your security code, and select OK. (See ”Access codes” on page 40.)
3.Scroll to the calling card of your choice, and select Options > OK.
4.Press the end key to return to standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.
5.Press and hold the call key for a few seconds until Card call is displayed.
6.When you hear the tone or system message, select OK.
Data or fax calls
Data or fax calls is a network service. See ”Network Services” on page viii for more information.
35