1.In the standby mode, select Menu > Settings > Phone settings > Automatic keyguard > On or Off.

2.If you select On, Set delay: appears.

3.Enter the delay (in hh:mm format), and select OK.

When keyguard is on, it may be possible to dial the emergency number.

DTMF tones

DTMF tones are the tones that sound when you press the keys on your phone keypad. You can use DTMF tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password.

DTMF tones are sent during an active call. You can send them manually from your phone keypad, or send them automatically by saving them in your phone.

Set type

In the standby mode, select Menu > Settings > Phone settings > DTMF tones > Manual DTMF tones and on of the following options:

Continuous — The tone sounds for as long as you press and hold a key.

Fixed — Used to send tones of the duration you specify in the DTMF tone length option.

S e t t i n g s

Off — Used to turn off tones. No tones are sent when you press a key.

Set length

You can also specify DTMF tone length when using the Fixed option.

In the standby mode, select Menu > Settings > Phone settings > DTMF tones > DTMF tone length > Short (0.1 seconds) or Long (0.5 seconds).

Welcome note

You can write a welcome note that briefly appears whenever you switch your phone on, if provided by your service provider.

Predictive text input is not available for entering welcome note text.

1.In the standby mode, select Menu > Settings > Phone settings > Welcome note.

2.Enter a note (up to 44 characters). Press * to display and select from available special characters.

3.When you are finished, select Options > Save.

Select Delete if you want to delete the previous text and begin creating another welcome note.

Banner

Banner is a network service. See ”Network Services” on page viii for more information.

37

Page 45
Image 45
Nokia 2118 manual Dtmf tones, Welcome note, Banner, Set type, Set length