Nokia Content Copier
Important: Windows Millennium Edition (ME) users have no way of disabling the Plug and Play software installation of your Nokia phones as a wireless modem. Windows ME launches the Add New Hardware Wizard immediately upon detection of your phone via Infrared. Before proceding with any Content Copier tasks, please click the Add New Hardware Wizard’s Cancel button. 3320/3360 users should have already performed the modem installation instructions, found on page 19.
Copying information from the source phone
If you select either the Copy data from one phone to another or Copy data from a phone to a PC options, Content Copier will transfer all compatible data types (Phone book, Calendar, To Do, Caller groups, etc.) from the compatible phone (or “source” phone).
•If you are copying the data from the source phone to your Nokia 3320 or 3360, the data is stored in your PC’s memory temporarily. Once you have connected your 3320/3360 (“target” phone) via infrared, Nokia Content Copier transfers the information from temporary storage into your phone.
•If you are copying your phone’s data and want to save it on your PC, Nokia Content Copier guides you through the process of saving the information to a
SAVE THE SOURCE PHONE DATA
Once the source phone’s data has been read, Content Copier allows you to save the information to your PC’s hard drive. Click the Save Data button, then navigate to the location on your hard drive where you want to store the information.
Nokia Content Copier automatically names the files for you, based on the type of data that is read from the source phone.
3
Nokia Connection Manager
You may need to use Nokia Connection Manager to select the type of connection you want Content Copier to use during various stages of the process. For example, if you select Copy data from one phone to another, and the source phone uses a serial cable, click Content Copier’s Connection button to launch Connection Manager. Then select the correct cable option for the source phone.
To switch connection type while using Content Copier:
1Establish the appropriate connection between your phone and PC (via IR,
2Click the desired connection type, then click Select.
3Allow Nokia Connection Manager to detect your phone.
4Click OK to return to Nokia Content Copier.
Note: If your phone is not detected right away, switch to one of the other connection types, then back to the desired connection type. This forces Connection Manager to redetect your phone.
Note: If you are copying data from one phone to another and the source phone uses an infrared connection, stop the infrared connection between phone and PC. Allow the Windows warning message regarding interrupted infrared communications to completely
[ 8 ]
