Nokia 3586I manual Stopwatch, Time an event using split timing, View timing options

3586i.ENv1_BIL_9356745.book Page 62 Wednesday, June 25, 2003 11:35 AM

6For a total, press Options twice.

7To start a new calculation, press and hold Clear for two seconds.

Note: This calculator has limited accuracy and rounding errors may occur, especially in long divisions.

• STOPWATCH

You can use your phone’s Stopwatch feature to time an event in hours, minutes and seconds. The event’s time can be saved, viewed, or deleted.

Warning: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

Important: Using the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone.

Time an event using split timing

The split time function allows you to measure the total time for an event, yet allows you to capture the elapsed time at various intervals. To measure split time:

1From the Organizer menu, scroll to Stopwatch and press Select.

2Scroll to Split timing, then press Select.

3Press Start. The running time appears on the display.

Once the split timer has started, you can:

•Press Split. The split time is displayed and the timer continues to display elapsed time.

•Press Stop to stop the timer and view the total elapsed time.

If you continue pressing Split, the most recent split time appears at the top of the list of split times. You can scroll to review previous times.

View timing options

Once you have stopped timing an event (using lap or split), you have the option to save the information, reset the stopwatch, or continue timing (split timing only).

While stopwatch is running, press Stop, then press Options. Select one of the following:

•Save—used to save the current timing data. Enter a name, then press OK.

•Reset—clears the current timing data and resets the timer.

•Start—restarts the split timer from the point the timer was stopped.

Time an event using lap timing

The lap time function allows you to measure the amount of time it takes to complete a cycle or lap. To measure lap time:

[ 62 ]