Nokia 3586I manual Touch Dialing, Set up 1-touch dialing

3586i.ENv1_BIL_9356745.book Page 50 Wednesday, June 25, 2003 11:35 AM

Note: If the voice tag is not recognized by the phone (or if you fail to speak a tag within three seconds after the tone), the message Name not recognized is displayed, and you are returned to the start screen.

3When the voice tag is recognized, the phone book entry will be displayed for three seconds and the voice tag is replayed through the ear piece.

After three seconds, the number is dialed.

The only other option for initiating voice dialing is to press the headset button momentarily at the start screen. The alert tones plays through the headset.

Speak the voice tag into the headset microphone. The voice tag will playback through the headset to confirm your choice.

Work with voice tags

You can listen to an existing voice tag (in case you forgot what you recorded), rerecord a voice tag, or delete an existing tag.

1At the start screen, press Contacts. Scroll to Voice tags, then press Select.

Note: This option displays a list of the contacts/numbers that have a voice tag assigned.

2Scroll to the phone number whose voice tag you want to edit, then press Options.

3Scroll to either Playback, Change, or Delete, and press Select.

Note: If you chose Change, press Start to begin rerecording. The new tag that is recorded replaces the old information.

• 1-TOUCH DIALING

When a phone number is assigned to one of the 1-touch dialing locations (2 - 9), you can call the phone number in either of the following ways:

•Press the number key that corresponds to a 1-touch dialing location and press the Send key.

•Press and hold the key that corresponds to a 1-touch dialing location until the call begins. The one key is preassigned to dial your voice mailbox number and cannot be reassigned.

Set up 1-touch dialing

If you want to assign a number to one of the number keys (2-9), do the following:

1Press Contacts.

2Scroll to 1-touch dialing and press Select.

3Scroll to the desired number key (keys 2 through 9), and press Assign.

Note: If a phone number is already assigned to a key, the phone book entry name is displayed and the left selection key is Options.

4Enter the phone number manually, or press Search to locate a phone book entry.

5Select the desired name or entry from the phone book. If more than one number is stored for that entry, scroll to the desired number and press Select.

[ 50 ]