Nokia 6315i manual Sounds settings, Stop watch

S e t t i n g s a n d t o o l s

Stop watch

The stop watch can be used for elapsed time measurement, such as for a sporting event. Up to eight events or records can be timed simultaneously.

The stop watch accuracy is not the same as that of a professional instrument. Therefore, Nokia advises against its use for official competitions or any other event in which a high-precision device would be required to establish exact times.

To time a single event, select Menu > Settings & Tools > Tools > Stop Watch > Start. The elapsed time is displayed in h:mm:ss:ms format. To stop or pause the stop watch, select Stop. To resume the stop watch from the stopped time, select Start again. To reset the stop watch to zero, select Reset with the watch in stopped mode.

To time multiple events, select Menu > Settings & Tools > Tools > Stop Watch > Start. To mark the elapsed time for each event you are measuring, select Cont. To display the event times, select View.

■Sounds settings

To adjust volumes and assign sounds to phone calls and alarms, select Menu > Settings & Tools > Sounds Settings and from the following options:

Master Volume—Use the volume keys or scroll key to change the volume setting of your phone from High to Low or to Alarm Only or Vibrate Only, then select OK. To silence the phone, scroll down, or press and hold the volume down key until All Sounds Off is displayed. To preview the sound level, select Play.

Call Sounds—To set ringtones for incoming calls, select Call Ringtone. To set the phone to vibrate when a call is received, select Call Vibrate > On.

Alert Sounds—Select the alert type (Tone, Vibrate, or Reminder) for an incoming TXT Message, PIX Message, or Voicemail Msg.

63