Nokia 8801 Turn the phone on and off, Open the keypad, See Configuration settings service on

G e t t i n g s t a r t e d

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-12 charger.

For availability of approved enhancements, please check with your dealer.

1.Connect the charger to a standard wall outlet.

2. Insert the charger plug into the round jack in the bottom of the phone. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

3.Disconnect the charger from the phone when the battery is fully charged.

You can use the phone while the charger is connected. The charging time depends on the charger and the battery used. For example, charging a BL-5X battery with the ACP-12 charger takes approximately 1 hour and 5 minutes while the phone is in the standby mode.

■Turn the phone on and off

Press and hold the power key as shown. If the phone asks for a PIN, enter the code, and select OK.

When you turn on your phone for the first time, the phone is in standby mode (see "Standby mode" on page 15) and a query appears, asking for the configuration settings from your service provider (network service). Confirm or decline the query.

See "Configuration settings service" on page 9.

■Open the keypad

1.Hold the phone in one hand.

2.With the other hand, press your thumb on the part of the phone that is below the display screen.

3. Push the top part of the phone (slide) upwards, as shown in the illustration.

12