INSTALLATION SUBMENUS
Select this Menu from the line “Installation” in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation.
You can also add features that were not included in the first installation. Please note that helpful information for every line is given at the end of the menu.
Antenna Satellite Configuration
Please refer to page 12.
Automatic Channel Search
Please refer to page 13.
Manual Channel Search
Please refer to page 14.
Advanced Channel Search
The information needed to enter in this menu is available in magazines covering satellite TV reception, or from your Service Provider.
Antenna Alternative: Select the satellite from which the signal is to be received.
Transponder Freq(MHz): Enter using the numbered buttons on the remote control.
Polarization: Select “Horizontal” or “Vertical”.
Symbol Rate(Msym/s): Enter with the numbered buttons.
FEC: Select “Auto” or the appropriate Forward Error Correction (FEC) value using the left/right button on the remote control.
Video PID: Enter the PID (Packet Identifier) for the video signal.
Audio PID: Enter the PID for the audio signal.
PCR PID: Enter the PID for the PCR (Programme Clock Reference).
Adjust Motor
Please refer to Page
GB 25
